Vutec SIK232 Interface - Instructions Bedienungsanleitung PDF herunterladen (Seite 9)

9 / 13

In our example from the previous section, we identified systems 12, 13, and 14. So, if

we wanted to close all motors on system 13, we would send the command “*13c00;”

Note:

When sending a command to all systems (such as “*0c00;”), the command will

not

4.2. Bus Mode

sent to wireless systems. Each system will have to be addressed individually.

When in bus mode, system 7 on the R2D7 operates identically to the other ports.

What else do we need to say about bus mode?

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Vutec SIK232 Interface - Instructions Bedienungsanleitung Seite 9