Vutec SIK232 Interface - Instructions Bedienungsanleitung PDF herunterladen (Seite 12)

12 / 13

7.1. Port Settings

Port Speed 9600 baud

Data Bits 8

Parity None

Stop Bits 1

Flow Control XOn / XOff

7.2. Command Strings

Segment Data Characters

Header * 1

System 1 – 7 for Bus Mode, 1 – 99 for Radio Mode, 0 = “ALL” 1 or 2

Command o, c, s, w, p, a, q 1

Address 01 – 60, 00 = “ALL” 2

Timing (optional) 001 – 999, represents 20

’s of a second, 000 = forever 3

Terminator semi-colon “;” or “CR” 1

7.3. Configuration Strings

Segment Data Characters

Header * 1

Command V, B, R 1

Terminator semi-colon “;” or “CR” 1

7.4. Response Strings

Event Response

Power On “version, XOn”

Terminator Received “LF” if good command

“U” if command was not understood

“CR” after command was relayed to controls

Buffer Overflow “O”

Buffer In Empty “XOn” (Ctrl+Q), but only if XOff was sent

Buffer Is Half-Full “XOff” (Ctrl+s)

1 2 ... 7 8 9 10 11 12 13

Keine Kommentare

Vutec SIK232 Interface - Instructions Bedienungsanleitung Seite 12