Vutec RPL-02 - Installation Instructions Bedienungsanleitung PDF herunterladen (Seite 4)

ELECTRICAL CONNECTIONS

Make connections per the Wiring Diagram as shown in Figure 3.

Dashed wirings shown are to be connected by installers.

Wirings must conform to local and/or national electrical codes and regulations.

Wirings must be of minimum 18-AWG.

Figure 3

Wiring Diagram

Optionally, the table lift may be controlled by a relay trigger, a low voltage control, an IR remote

control or a RF remote control.

1 2 3 4 5 6

Keine Kommentare

Vutec RPL-02 - Installation Instructions Bedienungsanleitung Seite 4